These are fabrics with a conductive characteristics making it an ideal material for wearable electronics. 

Show:
Knit Conductive Fabric - Silver 20cm square

This knit conductive fabric is 100% silver and super luxe! Use small pieces on the tips of gloves or in any soft circuit situation where you need a bit of stretch.

$14.95

Pressure-Sensitive Conductive Sheet (Velostat/Linqstat)

It's pressure-sensitive: squeezing it will reduce the resistance, so it's handy for making flexible sensors.

$5.95

Woven Conductive Fabric - Silver 20cm square

This woven conductive fabric is silver-plated nylon. Use small pieces for soft switches, plush keypads, capacitive touch sensors, and other textile interfaces.

$7.95

Knit Jersey Conductive Fabric - 20cm square

This knit jersey conductive fabric is 63% cotton, 35% silver yarn and 2% spandex. Use small pieces for soft switches, plush keypads, capacitive touch sensors, and other textile interfaces.

$14.95

Conductive Rubber Cord Stretch Sensor + extras!

Measuring stretch forces isn't easy - unless you have some conductive rubber cord! This cord is 2mm diameter, and 1 meter long, made of carbon-black impregnated rubber. Usually this material is used for EMF gasketing, but its also very fun to play with.

$14.50

Conductive Fabric - 300x330mm Ripstop

This is a conductive knit fabric for use in e-textiles. It is similar in feel to a nylon ripstop material. It is highly conductive with a surface resistivity of < 1 ohm/sq. This is a great add-on to any LilyPad project.

$12.95

Conductive Fabric - 12"x13" MedTex180

This is a conductive knit fabric for use in e-textiles. It is silver-plated nylon that is stretchy in one direction. It is highly conductive with a surface resistivity of < 1 ohm/sq. This is a great add-on to any LilyPad project. Medtex 180 Ag Nylon single directional stretch. It is a bit thicker than the Medtex 130.

$35.20

Conductive Fabric - 12"x13" MedTex130

This is a conductive knit fabric for use in e-textiles. It is silver-plated nylon that is stretchy in both directions. It is highly conductive with a surface resistivity of < 1 ohm/sq. This is a great add-on to any LilyPad project. Medtex 130 Ag Nylon stretch. It is a bit thinner than our Medtex 180.

$33.95

Conductive Ribbon - 4-Conductor, Insulated (1 yard)

This conductive ribbon is a great way to wire your e-textile projects without running hundreds of stitches all over the place! There are 4 insulated silver coated conductors in this flexible, polyester fabric ribbon. The conductors can’t be soldered to, but we do carry crimp-on connectors that you can use to terminate the ribbon cable with pin-headers. Check out the related items below for connectors.

$7.95

Fabric Button Pad - 5 Buttons

The 5 Button Fabric Button Pad, from Sensing Tex, is a great way to incorporate a basic media UI into your clothing, furniture, or European Carry-All.

$25.95

Conductive Ribbon - 3-Conductor (91 cm)

Essentially, it’s a fabric with 3 conductors woven into the ribbon. It measures roughly 0.2" (5.0 mm) wide and 0.03" (0.8mm) thick.

$9.50

EeonTex Conductive Stretchable Fabric

This EeonTex fabric is a bidirectionally stretchy nylon/spandex, elastic fabric coated with a long-lasting conductive formulation. This material has found use in soft, biometric strain and pressure sensors, such as for beds and seats, or where conforming to irregular shapes is the only thing required. Each sheet of the EeonTex Conductive Stretchable Fabric is pre-cut into 12 inch by 13 inch sheets about 0.38mm thick. This fabric is very versatile and perfect for anyone interested in wearables and e-textiles.

$39.00

EeonTex Pressure Sensing Fabric

EeonTex Pressure Sensing Fabric is highly conductive with a surface resistivity of 2K Ohm/sq. Additionally, it features a dynamic range of 5g to 100kg, as well as a data acquisition rate of 500 cycles per second. Pre-cut into 30.5cm x 33cm sheets about 0.8mm thick.

$44.50