Add sound on your wearables with these sound makers...

Show:
Piezo Buzzer - PS1240

Piezo buzzers are used for making beeps, tones and alerts. This one is petite but loud!

$3.20

Vibrating Mini Motor Disc

*BZZZZZZZZZZ* Feel that? That's your little buzzing motor, and for any haptic feedback project you'll want to pick up a few of them. These vibe motors are tiny discs, completely sealed up so they're easy to use and embed.

$7.95

Bone Conductor Transducer with Wires - 8 Ohm 1 Watt

Drown out the voices in your head with a bone conduction transducer! This incredible speaker does not have a moving cone like most speakers you've seen, instead, a small metal rod is wrapped with the voice coil.

$12.95

Electret Microphone

Small electret microphone. Useful in acoustic and audio applications.

$1.95

Piezo Element

Piezo elements come in handy when you need to detect vibration or a knock.

$2.25

Thin Speaker

If you want to get some sound out of your project but have a tight space budget, this is a good way to do it. This 0.25W, 8Ohm speaker is only 40mm in diameter and just over 4mm thick, the same kind you might find in one of those “talking greeting cards”.

$2.95

Piezo Vibration Sensor - Large

This basic piezo sensor from Measurement Specialties is often used for flex, touch, vibration and shock measurements. A small AC and large voltage (up to +/-90V) is created when the film moves back and forth.

$3.95

Audio Jack 3.5mm

Low profile 3.5mm stereo audio jack.

$1.95

Electret Microphone Amplifier - MAX4466 with Adjustable Gain

Add an ear to your project with this well-designed electret microphone amplifier. This fully assembled and tested board comes with a 20-20KHz electret microphone soldered on. For the amplification, we use the Maxim MAX4466, an op-amp specifically designed for this delicate task! The amplifier has excellent power supply noise rejection, so this amplifier sounds really good and isn't nearly as noisy or scratchy as other mic amp breakouts we've tried!

$9.50

LilyPad MP3

The LilyPad MP3 Player is your all-in-one audio solution, containing an Arduino-compatible microcontroller, MP3 (and many other formats) audio decoder chip, micro-SD card socket, and a stereo audio amplifier. Part of the Lilypad E-textiles line, this board can be used to give your fabric creations the gift of music, or any other sounds you can put on a micro-SD card.

$59.50

Flexible Speaker and Amplifier - 7x12cm

This is a very thin flexible speaker with included amplifier, perfect for wearable applications where you need a little sound to spice things up.

$51.80